Mazda 3 manuals

Tesla Model 3 2017-2022 Owner's Manual: Autosteer

Note: Autosteer is a BETA feature.

Autosteer builds upon Traffic-Aware Cruise Control, intelligently keeping Model 3 in its driving lane when cruising at a set speed.

Autosteer also allows you to use the turn signals to move Model 3 into an adjacent lane. Using the vehicle's camera(s), the radar sensor, and the ultrasonic sensors, Autosteer detects lane markings and the presence of vehicles and objects to steer Model 3.

Warning: Autosteer is a hands-on feature.

You must keep your hands on the steering wheel at all times.

Warning: Autosteer is intended for use only on highways and limited-access roads with a fully attentive driver. When using Autosteer, hold the steering wheel and be mindful of road conditions and surrounding traffic. Do not use Autosteer on city streets, in construction zones, or in areas where bicyclists or pedestrians may be present. Never depend on Autosteer to determine an appropriate driving path. Always be prepared to take immediate action. Failure to follow these instructions could cause damage, serious injury or death.

Canceling and Resuming
To manually cancel Traffic-Aware Cruise Control, move the gear lever up and release or press the brake pedal. The speedometer icon on the touchscreen turns gray to indicate that Traffic-Aware Crui ...

Operating Autosteer
Before you can operate Autosteer, you must enable it by touching Controls > Autopilot > Autosteer (Beta). To indicate that Autosteer is available (but not actively steering Model 3), the t ...

Other materials:

Steering Wheel And Column Inspection
Play Inspection 1. With the wheels in the straight-ahead position, start the engine. 2. Turn the steering wheel to the left and right gently, then verify that the steering wheel play is within the specification. Steering wheel play 030 mm {01.18 in} (When hydraulic operating) ...

B Pillar Upper Trim Removal/Installation
1. Remove the following parts: a. Adjuster anchor cover. b. Upper anchor installation bolts on the front seat belt. c. Front scuff plate. d. Rear scuff plate. 2. Partially peel back the seaming welt. 3. Remove the B-pillar lower trim.. 4. Grasp the lower end of the B-pillar upper trim, ...

Oil Cooler Removal/Installation [Mzr 2.0, Mzr 2.5]
WARNING: Hot engines and engine oil can cause severe burns. Turn off the engine and wait until it and the engine oil have cooled. A vehicle that is lifted but not securely supported on safety stands is dangerous. It can slip or fall, causing death or serious injury. Never work ...

2016-2022 Copyright www.mazda3tech.com