Mazda 3 manuals

Tesla Model 3 2017-2022 Owner's Manual: How Park Assist Works

Model 3 has several sensors designed to detect the presence of objects. When driving slowly in Drive or Reverse (for example, when parking), the sensors alert you if an object is detected in close proximity of your Model 3.

Objects are only detected in the direction of the gear you selected; front objects in Drive, rear objects in Reverse

Warning: You may not be alerted if Model 3 rolls freely in the opposite direction of the gear you selected (for example, you will not receive an alert if Model 3 rolls backwards down a hill while in Drive).

How Park Assist Works


The sensors are activated when driving slower than 5 mph (8 km/h).

How Park Assist Works


Warning: Never depend on Park Assist to inform you if an area you are approaching is free of objects and/or people. Several external factors can reduce the performance of Park Assist, causing either no readings or false readings. Therefore, depending on Park Assist to determine if Model 3 is approaching an obstruction can result in damage to the vehicle and/or objects, and can potentially cause serious injury. Always inspect the area with your own eyes.

When reversing, perform shoulder checks and use all mirrors. Park assist does not detect children, pedestrians, bicyclists, animals, or objects that are moving, protruding, located too far above or below the sensors, or too close or too far from the sensors. Park Assist is for guidance purposes only and is not intended to replace your own direct visual checks. It is not a substitute for careful driving.

Park Assist
...

Visual and Audio Feedback
When you shift to Reverse, the Park Assist view displays on the touchscreen, showing objects that are in close proximity to the front and rear of Model 3. This view closes when you shift into Driv ...

Other materials:

Antenna Feeder No.7 Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the liftgate upper trim.. 3. Disconnect the connector A. 4. Disconnect the connector B.. 5. Remove the bolt. 6. Remove the antenna feeder No.7. 7. Install in the reverse order of removal. Connector B Removal Note 1. Remove the c ...

Exhaust System Removal/Installation [Mzr 2.0, Mzr 2.5]
WARNING: A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system. 1. Remove the battery cover.. 2. Disconnect the negative battery cable.. 3. Remove the plug hole plate.. 4. Remove in the order ...

Front Door Checker Removal/Installation
1. Fully close the front door glass. 2. Disconnect the negative battery cable.. 3. Remove the inner garnish.. 4. Remove the front door trim.. 5. Remove the front door speaker.. 6. Remove the bolt A. 7. Remove the bolts B. 8. Pull out the front door checker from the front speake ...

2016-2022 Copyright www.mazda3tech.com