Mazda 3 manuals

Tesla Model 3 2017-2022 Owner's Manual: Inflation Effects

Warning: When airbags inflate, a fine powder is released. This powder can irritate the skin and should be thoroughly flushed from the eyes and from any cuts or abrasions.

After inflation, the airbags deflate to provide a gradual cushioning effect for the occupants and to ensure the driver's forward vision is not obscured.

If airbags have inflated, or if your vehicle has been in a collision, your vehicle requires servicing before it will power up. In addition, your airbags, seat belt pre-tensioners and any associated components must be checked, and if necessary, replaced. Contact Tesla Service immediately.

In a collision, in addition to the airbags inflating:

Note: In some collisions, even if airbags did not inflate, high voltage may be disabled and you will be unable to power up and drive.

Contact Tesla Service immediately.

Airbag Warning Indicator

The airbag indicator on the
touchscreen remains lit if the airbag system is malfunctioning. The only time this indicator should light up is briefly when Model 3 first powers up, in which case it turns off within a few seconds. If it remains lit, contact Tesla immediately and do not drive.

Airbag Warnings

Warning: All occupants, including the driver, should always wear their seat belts, whether or not an airbag is also provided at their seating position, to minimize the risk of severe injury or death in the event of a collision.

Warning: Front seat occupants should not place their arms over the airbag module, as an inflating airbag can cause fractures or other injuries.

Warning: Do not use seat covers on Model 3. Doing so could restrict deployment of the seat-mounted side air bags if a collision occurs. It can also reduce the accuracy of the occupant detection system, if equipped.

Warning: Airbags inflate with considerable speed and force, which can cause injury. To limit injuries, ensure that occupants are wearing seat belts and are correctly seated, with the seat positioned as far back as possible. The National Highway Traffic Safety Administration (NHTSA) recommends a minimum distance of 10" (25 cm) between an occupant's chest and an airbag.

Warning: Children should not be seated on the front passenger seat unless permitted by regulations in your market region. Follow all regulations in your region for the appropriate way to seat a child based on the child's weight, size, and age. The safest place to seat infants and young children is in a rear seating position. Seating an infant or child in a rear-facing child restraint system on a seat equipped with an operational airbag can cause serious injury or death.

Warning: Do not use a rear-facing child safety seat on a seat with an operational airbag in front of it. Doing so can cause injury or death if the airbag inflates.

Warning: To ensure correct inflation of the side airbags, maintain an unobstructed gap between an occupant's torso and the side of Model 3.

Warning: Passengers shouldn't lean their heads against doors. Doing so can cause injury if a curtain airbag inflates.

Warning: Do not allow passengers to obstruct the operation of an airbag by placing feet, knees or any other part of the body on or near an airbag.

Warning: Do not attach or place objects on or near the front airbags, the side of the front seats, the headliner at the side of the vehicle, or any other airbag cover that could interfere with inflation of an airbag. Objects can cause serious injury if the vehicle is in a collision severe enough to cause the airbag to inflate.

Warning: Following inflation, some airbag components are hot. Do not touch until they have cooled.

Ensuring Accurate Occupant Classification
To help ensure an occupant in the front passenger seat can be accurately classified, the passenger must: Wear a seat belt.  Sit upright on the center of the seat cushion, with shoulders ...


Other materials:

Customer Assistance (Puerto Rico)
Your complete and permanent satisfaction is our business. That is why all Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition. If you have any questions or recommendations for improvement regarding the service of your Mazda vehicle or serv ...

Spark Plug Inspection [Mzr 2.0, Mzr 2.5]
Specification Spark plug type LFJD-18110, L3Y2-18110 Plug Gap Inspection CAUTION: To avoid possible damage to the tip, do not adjust the spark plug gap. (L3Y2-18110) To prevent damaging the tip, use a wire type plug gap gauge when inspecting the spark plug gap. (L3 ...

Refrigerant Pressure Sensor Inspection [Full Auto Air Conditioner]
MZR 2.3 DISI Turbo, MZR 2.5 1. Install the manifold gauge. 2. Verify the high-pressure side reading of the manifold gauge. 3. Measure the terminal voltage of the climate control unit. 1C, 1E and 2J 4. Verify that below graph as measure the terminal voltage 2J. 5. Follow the clim ...

2016-2022 Copyright