Mazda 3 manuals

Tesla Model 3 2017-2022 Owner's Manual: Load Capacity Labeling

It is important to understand how much weight your Model 3 can safely carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo and any additional equipment added to your Model 3 since it was manufactured.

Two labels attached to Model 3 indicate how much weight Model 3 can safely carry.

Both labels are visible on the door pillar when the front door is open.

Note: If your Model 3 is fitted with Tesla accessory wheels or tires, your Model 3 may include an additional label indicating that load capacity may differ from what is stated on the label. If this is the case, instead of referring to the label, refer to the Owner's Manual.

Load Capacity Labeling

  1. Tire and Loading Information Label
  2. Vehicle Certification Label

Warning: Overloading Model 3 has an adverse effect on braking and handling, which can compromise your safety or cause damage.

Caution: Never load more than 55 lbs (25 kg) in the front trunk. Doing so can cause damage.

Caution: Never load more than 130 lbs (60 kg) on the rear load floor (above the lower trunk compartment) or more than 285 lbs (130 kg) in the lower trunk compartment. Doing so can cause damage.

Caution: Never store large amounts of liquid in Model 3. A significant spill can cause electrical components to malfunction.

Tire and Loading Information Label

The Tire and Loading Information label provides:

Tire and Loading Information Label

Never change this label, even if you use different tires in the future.

Note: If Model 3 is loaded to its full capacity, double check all tires to ensure they are inflated to their recommended pressure levels.

Vehicle Loading

Vehicle Certification Label
The Vehicle Certification label provides: GVWR - Gross Vehicle Weight Rating. The maximum allowable total mass of Model 3. This is calculated as the weight of Model 3, all passengers, fluids ...

Other materials:

Front Seat Slide Adjuster Removal/Installation
WARNING: Handling the front seats improperly can accidentally deploy the side air bag, which may seriously injure you. Read air bag system service warnings and cautions before handling the front seats.. CAUTION: After removing a front seat, do not operate the slider leve ...

Oil Control Valve (OCV) Removal/Installation [Mzr 2.3 Disi Turbo]
1. Remove the battery cover.. 2. Disconnect the negative battery cable.. 3. Remove the charge air cooler.. 4. Remove the ignition coils.. 5. Disconnect the ventilation hose from the cylinder head cover.. 6. Remove the cylinder head cover.. 7. Remove in the order indicated in the table. ...

Rear Seat Back Frame Removal/Installation
1. Remove the rear seat cushion.. 2. Remove the rear buckle installation bolt.. 3. Remove the rear seat back.. 4. Remove the headrest. 5. Open the fasteners. 6. Detach the hooks. 7. Remove the child-restraint seat anchor covers in the order of (1), (2) as shown in the figure. (5H ...

2016-2022 Copyright