Mazda 3 manuals

Tesla Model 3 2017-2022 Owner's Manual: Loading New Software

Tesla updates your vehicle's software wirelessly, constantly providing new features.

Tesla recommends you install software updates as soon as they are available on your vehicle. To ensure the fastest and most reliable delivery of software updates, leave Wi-Fi turned on and connected whenever possible.

In most cases, your vehicle must be connected to Wi-Fi to start an update

Note: On an as-needed basis, Tesla also sends software updates using a cellular connection.

Note: Software updates are not performed when Keep Climate On, Dog Mode, or Camp Mode is active.

Warning: Do not attempt to use the vehicle while the software is being updated. Vehicle functions, including some safety systems, may be limited or disabled when a software update is in progress and you could damage the vehicle.

When a software update is available, a yellow clock icon appears at the top of the touchscreen. There are three ways you can install software updates:

Note: Some software updates can take up to three hours to complete. Model 3 must be in Park while the software is being updated. To ensure the fastest and most reliable delivery of software updates, leave the Wi-Fi turned on and connected whenever possible

The yellow clock icon becomes a green download icon when a software update is downloading. If a yellow download icon displays, a software update is available but your vehicle is not connected to Wi-Fi.

Connect your vehicle to Wi-Fi to start the download.

Software Updates
...

Software Update Preferences
You can choose how quickly and often you receive software updates. To change your preference, navigate to Controls > Software > Software Update Preferences and choose either of these options ...

Other materials:

Ignition Switch Removal/Installation [Without Advanced Keyless Entry And Push Button Start System]
1. Disconnect the negative battery cable.. 2. Remove the column cover.. 3. Detach the tab. 4. Pull the pin in the direction of the arrow shown in the figure and release the lock. 5. Disconnect the ignition switch connector and key interlock solenoid connector. 6. Remove the ...

To Use Autopark
Autopark (if equipped) uses data from the ultrasonic sensors and GPS to simplify parking on public roads by maneuvering Model 3 into parallel and perpendicular parking spaces. Warning: Autopark's performance depends on the ability of the ultrasonic sensors to determine the vehicle's p ...

Outer Mirror Glass Installation
1. Connect the mirror heater connectors. (Vehicles with heated outer mirrors) 2. Connect the BSM indicator light connector. (Vehicles with BSM system) 3. Press part C on the outer mirror glass and install pin C. 4. Press part A on the outer mirror glass and install pins A. 5. Press part ...

2016-2022 Copyright www.mazda3tech.com