Mazda 3 manuals

Tesla Model 3 2017-2022 Owner's Manual: Naming Your Vehicle

To further personalize Model 3, you can name it. The name of your Model 3 appears in the mobile app. To name your vehicle, touch the Tesla "T" at the top center of the touchscreen, then touch Name Your Vehicle (or touch the vehicle's existing name). Enter the new name in the popup, then touch Save.

Speed Limit Mode

Speed Limit Mode allows you to limit the acceleration and maximum speed - between 50 and 90 mph (80 and 145 km/h) - of your Model 3. This feature is protected by a 4-digit PIN that you create when enabling it for the first time, and which must be entered whenever you want to disable and enable it.

If your Model 3 comes within approximately 3 mph (5 km/h) of the selected maximum speed, a chime sounds and text appears on the touchscreen above the driving speed. Additionally, your mobile app sends you a notification.

To enable Speed Limit Mode:

  1. Ensure the vehicle is in Park.
  2. Touch Controls > Safety & Security > Speed Limit Mode on the touchscreen or CONTROLS in your mobile app.
  3. Select the maximum driving speed that you would like to limit the vehicle to.
  4. Drag the slider to the ON position.
  5.  Enter the 4-digit PIN that you want to use to disable and enable Speed Limit Mode.

Note: If you forget the PIN, you can disable Speed Limit Mode by entering the login credentials for your Tesla Account.

Note: When Speed Limit Mode is enabled, the acceleration setting (Controls > Driving > Acceleration) is automatically set to Chill.

Warning: Driving downhill can increase driving speed, causing the vehicle to exceed your chosen maximum speed.

Warning: Speed Limit Mode is not a replacement for good judgment, driver training, and the need to closely monitor roadway speed limits and driving conditions. Accidents can occur at any speed.

Erasing Personal Data

You can erase all personal data (saved addresses, music favorites, HomeLink programming, etc.) and restore all customized settings to their factory defaults. This is useful when transferring ownership of Model 3. Touch Controls > Service > FACTORY RESET. Before erasing, Model 3 verifies your credentials by prompting you to enter the user name and password associated with your Tesla Account.

Navigation
Customize how the navigation system works by adjusting these settings: Volume Control: Increase or decrease the volume of spoken navigation instructions by touching - or +, respectively. Decr ...

Climate Controls
...

Other materials:

M Position Switch Inspection [Fw6 A EL]
Continuity Inspection NOTE: The M position switch is built into the selector lever component. 1. Remove the battery cover.. 2. Disconnect the negative battery cable.. 3. Remove the console.. 4. Disconnect the selector lever component connector. 5. Verify that the continuit ...

Hole Cover Removal/Installation
With Car-navigation system 1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Upper column cover. b. Instrument cluster. c. Center panel. d. Center cover. e. Dashboard upper panel. f. Multi information display. 3. Pull the hole cover in the direction of arr ...

Installing Seat Belt Retained Child Seats
First, make sure that the child safety seat is appropriate for the weight, height, and age of the child. Avoid dressing the child in bulky clothing and do not place any objects between the child and the restraint system. Adjust harnesses for every child, every trip. To securely hold chi ...

2016-2022 Copyright www.mazda3tech.com