Mazda 3 Owners Manual: Advanced Keyless Entry
| WARNING Radio waves from the key may aff ect medical devices such as pacemakers: Before using the key near people who use medical devices, ask the medical device manufacturer or your physician if radio waves from the key will aff ect the device. |
The advanced keyless function allows you to lock/unlock the door and the liftgate, or open the liftgate/trunk lid while carrying the key.
System malfunctions or warnings are indicated by the following warning beeps.
- Request switch Inoperable Warning Beep
- Refer to Request Switch Inoperable Warning Beep (With the advanced keyless function) on .
- Key Left-in-luggage Compartment/ Trunk Warning Beep
- Refer to Key Left-in-luggage Compartment Warning Beep (With the advanced keyless function) on .
- Key Left-in-vehicle Warning Beep
- Refer to Key Left-in-vehicle Warning Beep (With the advanced keyless function) on .
NOTE The advanced keyless entry system functions can be deactivated to prevent any possible adverse effect on a user wearing a pacemaker or other medical device. If the system is deactivated, you will be unable to start the engine by carrying the key. Consult an Authorized Mazda Dealer for details. If the advanced keyless entry system has been deactivated, you can start the engine by following the procedure indicated when the key battery goes dead.
Refer to Engine Start Function When Key Battery is Dead on .
System
The system operates only when the driver
is in the vehicle or within operational
range while the key is being carried.
NOTE
When the battery power is low, or in
places where there are high-intens ...
Other materials:
Front Shock Absorber And Coil Spring Disassembly/Assembly
WARNING:
Removing/installing the shock absorber and coil spring is dangerous. The
shock absorber and coil spring could fly off and cause serious injury or death,
and damage the vehicle.
1. Remove the front shock absorber and coil spring..
2. Remove in the order indicated in the ...
How To Use This Manual
Range of Topics
This manual contains procedures for performing all required service operations.
The procedures are divided into the following five basic operations:
Removal/Installation
Disassembly/Assembly
Replacement
Inspection
Adj ...
Front Outer Handle Removal/Installation
1. To access the glass installation bolt, position the front door glass so that
the distance from the top of the front door glass to the upper part of the front
beltline molding is approx. 80 mm {3.1 in}.
2. Disconnect the negative battery cable..
3. Remove the following parts:
a. Inne ...
