Mazda 3 manuals

Mazda 3 Owners Manual: Aluminum Wheel Maintenance

A protective coating is provided over the aluminum wheels. Special care is needed to protect this coating.

CAUTION Do not use any detergent other than mild detergent. Before using any detergent, verify the ingredients.

Otherwise, the product could discolor or stain the aluminum wheels.

NOTE

Underbody Maintenance
Road chemicals and salt used for ice and snow removal and solvents used for dust control may collect on the underbody. If not removed, they will speed up rusting and deterioration of such underbod ...

Plastic Part Maintenance
When cleaning the plastic lenses of the lights, do not use gasoline, kerosene, rectified spirit, paint, thinner, highly acidic detergents, or strongly alkaline detergents. Otherwise, these ...

Other materials:

Windshield Defrosting and Defogging
Set the mode selector dial to the position. Set the temperature control dial to the desired position. Set the fan control dial to the desired speed. If dehumidified heating is desired, turn on the air conditioner. WARNING Do not defog the windshield using the pos ...

Vanity Mirror Illumination Inspection
1. Disconnect the negative battery cable.. 2. Remove the sunvisor.. 3. Verify that the continuity between the vanity mirror illumination terminals is as indicated in the table. If not as indicated in the table, inspect the bulb. If there is no malfunction, replace the sunvisor. ...

Manual Transaxle Shift Pattern
The shift pattern of the transaxle is conventional, as shown. Depress the clutch pedal all the way down while shifting; then release it slowly. Your vehicle is equipped with a device to prevent shifting to R (reverse) by mistake. Push the shift lever downward and shift to R. ...

© 2016-2024 Copyright www.mazda3tech.com