Mazda 3 Service Manual: Body Exterior, Frame

Trunk Lid Trim Removal/Installation

1. Remove the fasteners, then remove the trunk lid trim. 2. Install in the reverse order of removal. ...

Aerodynamic Under Cover No.1 Removal/Installation

1. Remove the aerodynamic under cover No.2.. 2. Peel off the front mudguard.. 3. Remove the bolts and fastener. 4. Remove the aerodynamic under cover No.1 in the direction of the arrow shown ...

Other materials:

Air Filter Removal/Installation [Skyactiv G 2.0]
1. Remove the fuel-filler pipe protector.. 2. Remove in the order indicated in the table. 1 Evaporative hose 2 Air filter 3. Install in the reverse order of removal. ...

Auxiliary Jack/Usb Port Inspection
Auxiliary jack inspection 1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Upper panel. b. Shift lever knob (MTX). c. Selector lever knob (ATX). d. Shift panel. e. Side wall. f. Console. g. Auxiliary jack/USB port. 3. Connect a commercially-available pl ...

Maintenance of the Active Driving Display
The combiner and mirror surface have a special coating. When cleaning, do not use a hard or rough-surface cloth, or cleaning detergent. In addition, if a chemical solvent gets on the active driving display, wipe it off immediately. Otherwise, the combiner and mirror could be damaged and the s ...