Mazda 3 Service Manual: Brake Control, Vehicle Dynamics

Vacuum Pump Removal/Installation [Skyactiv G 2.0]

1. Remove the plug hole plate.. 2. Remove the battery and battery tray.. 3. Pinch open the clamp using pliers and disconnect the vacuum hose from the vacuum pump. 4. Remove in the order sh ...

DSC HU/CM Inspection

1. Disconnect the DSC HU/CM connector.. 2. Connect the negative battery cable.. 3. Attach the tester lead to the DSC HU/CM wiring harness-side connector and inspect voltage, continuity, or resis ...

Other materials:

Glass Antenna
Purpose, Function 4SD The AM/FM radio waves and RDS-TMC (Radio Data System-Traffic Message Channel) radio waves are converted to an electrical signal and the signal is sent to the audio unit. 5HB (With audio unit (with display)) The RDS-TCM (Radio Data System-Traffic Mes ...

Valve Clearance Adjustment [Mzr 2.0, Mzr 2.5]
1. Remove the battery cover.. 2. Disconnect the negative battery cable. 3. Remove the plug hole plate.. 4. Disconnect the wiring harness. 5. Remove the ignition coils.. 6. Remove the spark plugs.. 7. Remove the ventilation hose. 8. Remove the oil level gauge. 9. Remove the cylinder h ...

Front Fog Light Relay Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the front mudguard.(RH). 3. Remove the front fog light relay case. 4. Remove the cover. 5. Remove the front fog light relay. 6. Install in the reverse order of removal.. Front Fog Light Relay Installation Note 1. Install the front ...