Pedal Height Inspection
1. Measure the distance from the center of the upper surface of the pedal pad to the floor covering and verify that it is as specified.
If not within the specification, replace the brake pedal.
MZR 2.0, SKYACTIV-G 2.0, MZR 2.5: 125.0 mm {4.921 in}
MZR 2.3 DISI Turbo: 128.9 mm {5.075 in}
Pedal Play Inspection
1. Pump the pedal several times to release the vacuum in the power brake unit.
2. Gently depress the pedal by hand and measure the pedal play.
If not within the specification, inspect the wear of the joint pin. Replace it if there is any malfunction.
4.0—8.4 mm {0.16—0.33 in}
NOTE:
If there is no malfunction in the joint pin, there is a possibility that the power brake unit has some malfunction. Verify that there are no malfunctions, and replace it if necessary.
Pedal-to-floor Clearance Inspection
1. Start the engine and depress the brake pedal with a force of 147 N {15.0 kgf, 33.0 lbf}
.
2. Measure the distance from the center of the upper surface of the pedal pad to the floor covering and verify that it is as specified.
If it is less than the specification, inspect for air in the brake line.
MZR 2.0, SKYACTIV-G 2.0, MZR 2.5: 83.5 mm {3.29 in} or more
MZR 2.3 DISI Turbo: 88.6 mm {3.49 in} or more
Audio Operation Using Voice Recognition (Type B)
Main audio operation
The below commands are examples of the available commands.
When the talk button is pressed and the following command is spoken out, the
audio can be
operated. The commands in the () can be omitted. The specified name and number
are put
into the {}.
NOTE
Some c ...
Vanity Mirror Illumination Bulb Removal/Installation
1. Disconnect the negative battery cable..
2. Insert a tape-wrapped fastener remover into the service hole, and pry it in
the direction indicated by the arrow to remove the lens.
3. Remove the vanity mirror illumination bulb.
4. Install in the reverse order of removal. ...
Driving Tips
WARNING
Do not let the vehicle move in a
direction opposite to the direction
selected by the selector lever:
Do not let the vehicle move backward
with the selector lever in a forward
position, or do not let the vehicle
move forward with the selector lever
in the revers ...