Leakage Inspection
1. Perform the following procedures:
Assemble the hose used for inspection to port A.
Cover ports B and C with the caps.
Except for Mexico
Mexico
CAUTION:
Do not apply a pressure 20 kPa {150 mmHg, 5.91 inHg} or more to the charcoal canister for 1 min. or more. Doing so will damage the charcoal canister.
2. Apply pressure (19.6 kPa {147 mmHg, 5.79 inHg}
) through the hose, and verify that air does not leak from the charcoal canister.
Except for Mexico
Mexico
If there is airflow, replace the charcoal canister..
If there is no airflow, perform the following “Airflow Inspection”.
Airflow Inspection
1. Perform the following procedure to verify the charcoal canister airflow.
Plug the port C.
Except for Mexico
Mexico
Apply a pressure of 19.6 kPa {147 mmHg, 5.79 inHg}
to port A.
Verify that there is airflow from port B.
If there is no airflow, replace the charcoal canister..
Plug the port B.
Except for Mexico
Mexico
Apply a pressure of 19.6 kPa {147 mmHg, 5.79 inHg}
to port A.
Verify that there is airflow from port C.
If there is no airflow, replace the charcoal canister..
Plug the port A.
Except for Mexico
Mexico
Apply a pressure of 19.6 kPa {147 mmHg, 5.79 inHg}
to port B.
Verify that there is airflow from port C.
If there is no airflow, replace the charcoal canister..
Relay Inspection [Skyactiv G 2.0]
Relay Type
Connector type
Part name
Type A
Front fog light relay
Headlight relay (HI)
Headlight relay (LO)
Horn relay
TNS relay
A/C relay
Start ...
Front Door Key Cylinder Removal/Installation
1. To access the glass installation bolt, position the front door glass so that
the distance from the top of the front door glass to the upper part of the front
beltline molding is approx. 80 mm {3.1 in}.
2. Disconnect the negative battery cable..
3. Remove the following parts:
a. Inne ...
Theft Deterrent System Clearing Freeze Frame Data
1. Connect the M-MDS (IDS) to the DLC–2.
2. After the vehicle is identified, select the following items from the initialization
screen of the IDS.
Select “Body”.
Select "Burglar Service Functions".
3. Then, select the following item from the screen menu.
...