Mazda 3 manuals

Mazda 3 Owners Manual: Component Parts

Audio unit

Mazda 3. Audio unit


Microphone (hands-free)

The microphone is used for speaking voice commands or when making a Hands-free call.

Talk button, Pick-Up button and Hang-Up button (hands-free) The basic functions of Bluetooth ® Hands-Free can be used for such things as making calls or hanging up using the talk, pick-up and hang-up buttons on the steering wheel.

Commander switch (Type B)

The commander switch is used for volume adjustment and display operation. Tilt or turn the commander knob to move the cursor. Press the commander knob to select the icon.

Volume adjustment

The power/volume dial of the audio unit *1 or the volume dial of the commander switch *2 is used to adjust the volume. Turn the dial to the right to increase volume, to the left to decrease it.

The volume can also be adjusted using the volume button on the steering wheel.

*1 Type A
*2 Type B

NOTE If the volume is lower compared to other audio modes, increase the volume from the device side.

(Type B)

Conversation volume and the volume of the voice guidance and ringtone can each be set in advance.

  1. Select the icon on the home
    screen to display the Communication screen.
  2. Select .

  3. Adjust the and the
    using the slider.

Bluetooth®
Bluetooth ® Hands-Free outline When a Bluetooth ® device (mobile phone) is connected to the vehicle's Bluetooth ® unit via radio wave transmission, a call can be made or received by pressing the t ...

Bluetooth ® Preparation (Type A)
Bluetooth ® Hands-Free Preparation Pairing code setting The 4-digit pairing code setting for registration of your cell phone (pairing) can be set beforehand. NOTE The initial setting value is “0 ...

Other materials:

A/C Unit Removal/Installation
1. Set the air mix mode to MAX COLD. 2. Disconnect the negative battery cable.. 3. Discharge the refrigerant.. 4. Drain the engine coolant.. 5. Remove the plug hole plate. 6. Remove the charge air cooler cover. (MZR 2.3 DISI Turbo). 7. Remove the insulator. (MZR 2.3 DISI Turbo) 8. ...

Purge Solenoid Valve Removal/Installation [Mzr 2.0, Mzr 2.5]
1. Remove the battery cover.. 2. Disconnect the negative battery cable.. 3. Remove in the order indicated in the table. 1 Purge solenoid valve connector 2 Evaporative hose (See Evaporative Hose Installation Note.) 3 ...

Engine Exhaust (Carbon monoxide)
WARNING Do not drive your vehicle if you smell exhaust gas inside the vehicle: Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which is colorless, odorless, and poisonous. When inhaled, it can cause loss of consciousness and death. If you smell ...

© 2016-2024 Copyright www.mazda3tech.com