Mazda 3 Service Manual: Door Adjustment
1. Loosen the door hinge installation bolts.
2. Adjust the gap and height difference to the standard range by moving the door back and forth, left and right.
-
Standard range
-
a: 2.5―4.5 mm {0.10―0.17 in}
-
b: -1.0―1.0 mm {-0.039―0.039 in}
-
c: 2.5―4.5 mm {0.10―0.17 in}
-
d: -1.0―1.0 mm {-0.039―0.039 in}
-
e: 2.5―4.5 mm {0.10―0.17 in}
-
f: -1.0―1.0 mm {-0.039―0.039 in}
3. Tighten the bolts.
4. If the door does not open/close smoothly, adjust it by loosening the door lock striker installation screw.
Door Sash Film Installation
1. Remove any grease or dirt from the affixing surface of the door.
2. Cut away the unused portion along the dotted lines.
3. Peel off the backing paper and attach the door sash film onto the ...
Other materials:
Tire Rotation
To equalize tread wear, rotate the tires every 12,000 km (7,500 miles) at the
latest or sooner
if irregular wear develops. Mazda recommends to rotate every 8,000 km (5,000
miles) to
help increase tire life and distribute wear more evenly.
Inspect the tires for uneven wear and damage. Abno ...
Driver Side Air Bag Module Removal/Installation [Standard Deployment Control
System]
WARNING:
Handling the air bag module improperly can accidentally deploy the air bag
module, which may seriously injure you. Read the air bag system service warnings
and cautions before handling the air bag module..
1. Switch the ignition to off.
2. Disconnect the negative batte ...
Dashboard Illumination
When the position lights are turned
on with the ignition switched ON,
the brightness of the instrument panel
illumination is dimmed.
NOTE
When the position lights are turned on,
the position lights indicator light in the
instrument cluster turns on.
Refer to Headlights on .
The brightness ...
