Mazda 3 Service Manual: Drive Belt Auto Tensioner Inspection [Mzr 2.0, Mzr 2.5]
MZR 2.0
1. Remove the generator drive belt with the A/C drive belt still installed and set it out of the way..
2. Verify that the drive belt auto tensioner moves smoothly in the operational direction.
-
If it does not move smoothly, replace the drive belt auto tensioner..
3. Turn the drive belt auto tensioner pulley by hand and verify that it rotates smoothly.
-
If it does not move smoothly, replace the drive belt auto tensioner..
4. Install the generator drive belt..
MZR 2.5
1. Remove the drive belt..
2. Verify that the drive belt auto tensioner moves smoothly in the operational direction.
-
Replace the drive belt auto tensioner if necessary..
3. Rotate the drive belt auto tensioner pulley by hand and verify that it rotates smoothly.
-
Replace the drive belt auto tensioner if necessary..
4. Install the drive belt..
Drive Belt Auto Tensioner Inspection [Mzr 2.3 Disi Turbo]
1. Remove the aerodynamic under cover No.2 and splash shield as a single unit..
2. Remove the drive belt..
3. Verify that the drive belt auto tensioner moves smoothly in the operational
directi ...
Other materials:
Transaxle Oil Replacement [A26 M R]
1. Park the vehicle on level ground.
2. Remove the aerodynamic under cover No.2..
3. Remove the drain plug and gasket.
4. Drain the oil into a suitable container.
5. Install a new gasket and the drain plug.
Tightening torque
28—51 N·m {2.9—5.2 kgf·m, 21—37 ft·lbf}
6. Remo ...
Heater, Ventilation And Air Conditioning
Abbreviation
A/C
Air Conditioning
Features
The full-auto air conditioner has been adopted for vehicles with SKYACTIV-G
2.0.
Specifications
Full-auto air conditioner
Basic system
Item
Specification
...
Afs (Adaptive Front Lighting System) Off Switch Inspection
1. Disconnect the negative battery cable..
2. Remove the AFS OFF switch..
3. Verify that the continuity between the AFS OFF switch terminals is as indicated
in the table.
If the continuity is not as indicated in the table, replace the AFS OFF switch.
4. Apply battery po ...
