Mazda 3 Service Manual: Electrical

Pilot Bearing Inspection [C66 M R]

1. Without removing the pilot bearing, turn the bearing while applying force in the axial direction. If there is any malfunction, replace the pilot bearing.. ...

Electrical System

Electrical Parts Battery cable Before disconnecting connectors or removing electrical parts, disconnect the negative battery cable. Wiring Harness To remove the wiring ha ...

Other materials:

On Board Diagnostic System Simulation Inspection [FS5 A EL]
1. Connect the M-MDS(IDS) to the DLC-2. 2. After the vehicle is identified, select the following items from the initialization screen of the IDS. a. Select "DataLogger". b. Select "Modules". c. Select "TCM". 3. Select the simulation items from the PID ta ...

Interior Equipment (View A)
Door-lock knob Turn and lane-change signal Lighting control Wiper and washer lever DSC OFF switch Tire pressure monitoring system set switch LDWS switch AFS OFF switch BSM OFF switch Headlight leveling switch Outside mirror switch Door-lock switch Power window lock s ...

Replacing Interior Light Bulbs
Overhead lights (Front)/Map lights * , Overhead lights (Front) * , Overhead lights (Rear) * , Vanity mirror lights * Wrap a small flathead screwdriver with a soft cloth to prevent damage to the lens, and then remove the lens by carefully prying on the edge of the lens with the flathead ...