Mazda 3 Service Manual: Exterior

Light Switch Removal/Installation

1. Disconnect the negative battery cable.. 2. Remove the column cover.. 3. Disconnect the connector. 4. Remove the screws shown in the figure, then remove the light switch by pulling it in ...

Afs (Adaptive Front Lighting System) Control Module Removal/Installation

NOTE: Perform the auto leveling system initialization after newly replacing the AFS control module to assure that the auto leveling system operates correctly. 1. Disconnect the negati ...

Other materials:

Center Panel Removal/Installation
1. Disconnect the negative battery cable.. 2. Affix protective tape to the position shown in the figure. 3. Hold parts (A) shown in the figure with your hands and pull the lower edge of the center panel in the direction of the arrow (1), and remove clips A. CAUTION: Be careful no ...

TCM Inspection [FS5 A EL]
NOTE: The TCM terminal voltage can vary with conditions when measuring and changes due to age deterioration on the vehicle, causing false diagnosis. Therefore a comprehensive inspection of the input and output systems, and the TCM is necessary to determine where the malfunction occu ...

Steering Wheel And Column Removal/Installation [With Advanced Keyless Entry And Push Button Start System]
WARNING: Handling the air bag module improperly can accidentally operate (deploy) the air bag module, which may seriously injure you. Read the service warnings before handling the air bag module.. 1. Remove the driver-side front scuff plate.. 2. Remove the driver-side front sid ...