Mazda 3 manuals

Mazda 3 Service Manual: Forced Ignition On [With Advanced Keyless Entry And Push Button Start System]

Mazda 3 Service Manual / Electrical / Ignition / Forced Ignition On [With Advanced Keyless Entry And Push Button Start System]

NOTE:

1. Verify that there are no advanced keys in the vehicle.

2. Get PCM part number from As-built site.

3. Connect the M-MDS (IDS) to the DLC-2.


4. Manual vehicle identification.

5. Select the “All other” from Vehicle list.

6. Input the PCM part number on the following screen.


7. After the vehicle is identified, select the following items from the initialization screen of the IDS.

8. Perform the procedure according to the directions on the screen.

9. Delete session with keeping ignition ON.

10. Normal vehicle identification.

Ignition
...

Ignition Coil Inspection [Mzr 2.0, Mzr 2.5]
Ignition Coil Inspection 1. Perform the spark test and identify the malfunctioning cylinder.. 2. Replace the ignition coil of the malfunctioning cylinder with that of a normal cylinder, and perfo ...

Other materials:

Recommendations for Shifting (for Vehicles without Gear Shift Indication)
Upshifting For normal acceleration, Mazda recommends these shift points: (U.S.A. and Canada) For cruising, Mazda recommends these shift points: (U.S.A. and Canada) Downshifting When you must slow down in heavy traffic or on a steep upgrade , downshift before the engine starts to ov ...

Ion Sensor Inspection [Skyactiv G 2.0]
DTC Inspection NOTE: Because the ion sensor is integrated in the ignition coil, replacing the ion sensor includes replacement of the ignition coil/ion sensor. 1. Connect the M-MDS to the DLC-2. 2. Perform the DTC inspection using the M-MDS.. If any DTC related to the ...

Column Cover Removal/Installation
1. Pull down the steering wheel. 2. Pull the upper column cover in the direction of the arrow in the order of (1) and (2), then remove the upper column cover while detaching the hooks and pins. 3. Pull up the steering wheel. 4. Remove the ignition key illumination.. 5. Remove the scre ...

© 2016-2022 Copyright www.mazda3tech.com