Mazda 3 Service Manual: Fuel Filter (High Pressure) Removal/Installation [Mzr 2.0, Mzr 2.5]

Mazda 3 Service Manual / Engine / Fuel / Fuel Filter (High Pressure) Removal/Installation [Mzr 2.0, Mzr 2.5]

WARNING:

Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin and eyes. To prevent this, always complete the “Fuel Line Safety Procedure”, while referring to “BEFORE SERVICE PRECAUTION”.
A person charged with static electricity could cause a fire or explosion, resulting in death or serious injury. Before draining fuel, make sure to discharge static electricity by touching the vehicle body.

1. Complete the “BEFORE SERVICE PRECAUTION”..

2. Remove the battery cover..

3. Disconnect the negative battery cable..

4. Remove the rear seat cushion..

5. Remove the fuel pump unit..

6. Remove the fuel filter (high-pressure)..

7. Install in the reverse order of removal.

8. Complete the “AFTER SERVICE PRECAUTION”..

Fuel Filler Lid Removal/Installation

1. Remove the bolts. 2. Remove the fuel-filler lid. 3. Install in the reverse order of removal. 4. Adjust the fuel-filler lid.. ...

Fuel Injector Inspection [Mzr 2.0, Mzr 2.5]

Resistance Inspection 1. Remove the battery cover.. 2. Disconnect the negative battery cable.. 3. Disconnect the fuel injector connector. 4. Inspect the resistance between fuel injector termina ...

Other materials:

Outside Mirrors
WARNING Be sure to look over your shoulder before changing lanes: Changing lanes without taking into account the actual distance of the vehicle in the convex mirror is dangerous. You could have a serious accident. What you see in the convex mirror is closer than it app ...

Power Steering Fluid Inspection
Fluid Level Inspection 1. Verify that the fluid level is between MAX and MIN of the sub tank when the engine is cold. If the fluid is not at the specified level, adjust the fluid level (MIN-MAX on sub tank) by adding/draining the fluid. Power steering fluid type Mazda Gen ...

Call Interrupt
A call can be interrupted to receive an incoming call from a third party. When is selected or the pickup button on the steering wheel is pressed, the current call is held and the system switches to the new incoming call. When is selected, the current call is ended and the system switche ...