Mazda 3 manuals

Mazda 3 Owners Manual: Fuel Requirements

Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL, which will reduce exhaust emissions and keep spark plug fouling to a minimum.

This vehicle will perform best with fuel listed in the table.

Mazda 3. Fuel Requirements


* U.S. federal law requires that octane ratings be posted on gasoline station pumps.

Fuel with a rating lower than 87 octane (91 RON) will negatively affect the emission control system performance and could also cause engine knocking and serious engine damage.

CAUTION
  • USE ONLY UNLEADED FUEL.

    Leaded fuel is harmful to the catalytic converter and oxygen sensors and will lead to deterioration of the emission control system and or failures.

  • This vehicle can only use oxygenated fuels containing no more than 10 % ethanol by volume. Damage to the vehicle may occur when ethanol exceeds this recommendation, or if the gasoline contains any methanol. Stop using gasohol of any kind if your vehicle engine is performing poorly.
  • Never add fuel system additives, otherwise the emission control system could be damaged.

    Consult an Authorized Mazda Dealer for details.

Gasoline blended with oxygenates such as alcohol or ether compounds are generally referred to as oxygenated fuels. The common gasoline blend that can be used with your vehicle is ethanol blended at no more than 10 %. Gasoline containing alcohol, such as ethanol or methanol, may be marketed under the name "Gasohol".

Vehicle damage and drivability problems resulting from the use of the following may not be covered by the warranty.

Fuel and Engine Exhaust Precautions
...

Emission Control System
This vehicle is equipped with an emission control system (the catalytic converter is part of this system) that enables the vehicle to comply with existing exhaust emissions requirements. ...

Other materials:

How To Use This Manual
Range of Topics This manual contains procedures for performing all required service operations. The procedures are divided into the following five basic operations: Removal/Installation Disassembly/Assembly Replacement Inspection Adj ...

Brakes SST
49 D043 0A0 Adapter set 49 U043 0A0A Oil pressure gauge set 49 0221 600C Disc brake expand tool 49 B033 001 Installer 49 G033 102 Handle ...

Starter Interlock Switch Inspection [Mzr 2.3 Disi Turbo]
CAUTION: Do not reuse the starter interlock switch if it is removed from the vehicle even once. Replace with a new starter interlock switch when installing. 1. Remove the battery cover.. 2. Disconnect the negative battery cable.. 3. Disconnect the starter interlock switch connec ...

© 2016-2024 Copyright www.mazda3tech.com