Mazda 3 Service Manual: General

Brakes

...

Brake Fluid Air Bleeding

CAUTION: Brake fluid will damage painted surfaces. Be careful not to spill any on painted surfaces. If it is spilled, wipe it off immediately. NOTE: Keep the fluid level in th ...

Other materials:

Input/Turbine Speed Sensor Inspection [FS5 A EL]
CAUTION: Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector when disconnecting it. On-Vehicle Inspection 1. Perform the following procedures. a. Remove the battery cover.. b. ...

Battery Runs Out
Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you feel unsure about jump-starting, we strongly recommend that you have a competent service technician do the work. WARNING Follow These Precautions Carefully: To ensure safe and correct handl ...

Oil Control Valve (OCV) Inspection [Mzr 2.0, Mzr 2.5]
Coil Resistance Inspection 1. Remove the battery cover.. 2. Disconnect the negative battery cable.. 3. Remove the plug hole plate.. 4. Disconnect the OCV connector. 5. Measure the resistance between terminals A and B using an ohmmeter. OCV coil resistance 6.9—7.9 ohms [20°C {6 ...