Mazda 3 Service Manual: Generator Disassembly/Assembly [Mzr 2.0, Mzr 2.5]
CAUTION:
-
Melt the solder quickly, otherwise the diodes (rectifier) and regulator will be damaged by excessive heat.
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
MZR 2.0
|
1 |
Rotor component |
|
2 |
Stator coil component |
|
3 |
Pulley |
|
4 |
Rotor |
|
5 |
Front bearing |
|
6 |
Front cover |
|
7 |
Stator coil |
|
8 |
Rectifier |
|
9 |
Regulator component |
|
10 |
Rear cover |
MZR 2.5
|
1 |
Rotor component |
|
2 |
Stator coil component |
|
3 |
Pulley |
|
4 |
Rotor |
|
5 |
Front bearing |
|
6 |
Front cover |
|
7 |
Heat insulator |
|
8 |
Stator coil |
|
9 |
Rectifier |
|
10 |
Regulator component |
|
11 |
Rear cover |
Generator Inspection [Mzr 2.0, Mzr 2.5]
CAUTION:
Do not apply direct battery positive voltage to generator terminal D, otherwise
it could cause damage to the internal parts (power transistor) of the generator.
Generator War ...
Other materials:
Front Door Hinge Removal/Installation
1. Disconnect the negative battery cable..
2. Remove the following parts:
a. Front bumper.
b. Front combination light.
c. Front fender molding.
d. Side step molding.
e. Front fender panel.
f. Front door.
3. Remove in the order indicated in the table.
1
B ...
Traction Control System (TCS)
The Traction Control System (TCS)
enhances traction and safety by controlling
engine torque and braking. When the TCS
detects driving wheel slippage, it lowers
engine torque and operates the brakes to
prevent loss of traction.
This means that on a slick surface, the
engine adjusts automatic ...
Drive Shaft (Double Offset Joint) Disassembly/Assembly
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
1
Boot band (transaxle side)
(See DRIVE SHAFT (TRIPOD JOINT) DISASSEMBLY/ASSEMBLY.)
2
Outer ring
(See Outer Ring, Clip Assembly Note. ...
