Mazda 3 Service Manual: Glass & Windows

Theft Deterrent System Reading Freeze Frame Data

1. Connect the M-MDS (IDS) to the DLC–2. 2. After the vehicle is identified, select the following items from the initialization screen of the IDS. Select “Body”. Select "B ...

Base Installation

1. Cut away all of the original sealant using a razor. WARNING: Using a razor with bare hands can cause injury. Always wear gloves when using a razor. 2. Clean and degrease the cera ...

Other materials:

Trunk Lid Key Cylinder Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the trunk lid trim.. 3. Lift the clip in the direction of the arrow (1), and pull out the key rod in the direction of the arrow (2). 4. Remove the nuts. 5. Remove the trunk lid key cylinder. 6. Install in the reverse order of r ...

Front Door Speaker Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the inner garnish.. 3. Remove the front door trim.. 4. Disconnect the connector. Without Bose® With Bose® 5. Remove the screw. 6. Remove the front door speaker in the direction of the arrow shown in the figure. Without Bose® ...

Dehumidifying (With air conditioner)
Operate the air conditioner in cool or cold weather to help defog the windshield and side windows. Set the mode selector dial to the desired position. Set the air intake selector to the outside air position. Set the temperature control dial to the desired position. Set the fan cont ...