Mazda 3 manuals

Mazda 3 Service Manual: Hazard Warning Switch Removal/Installation

Mazda 3 Service Manual / Body / Lighting & Horn / Exterior / Hazard Warning Switch Removal/Installation

1. Disconnect the negative battery cable..

2. Remove the center panel..

3. Remove in the order indicated in the table.



1

Screw

2

Hazard warning switch


4. Install in the reverse order of removal.

Hazard Warning Switch Inspection
1. Disconnect the negative battery cable.. 2. Remove the center panel.. 3. Verify that the continuity between the hazard switch terminals is as indicated in the table. If not as indi ...

Headlight Leveling Switch Inspection
1. Disconnect the negative battery cable.. 2. Remove the headlight leveling switch.. 3. Verify that the resistance and continuity between the headlight leveling switch terminals is as indicated ...

Other materials:

Navigation
Customize how the navigation system works by adjusting these settings: Volume Control: Increase or decrease the volume of spoken navigation instructions by touching - or +, respectively. Decreasing all the way to the left mutes the instructions. You can also mute navigation instruction ...

Parking Brake Lever Inspection
Stroke Inspection 1. Pump the brake pedal a few times. 2. Pull the parking brake lever two to three times. 3. Inspect the parking brake stroke by slowly pulling at point A 50 mm {1.97 in} from the end of the parking brake lever with a force of 98 N {10 kgf, 22 lbf} and counting the number o ...

Voice Recognition (Type A)
In this section, the basic operation of the voice recognition is explained. Activating Voice Recognition To Activate the Main Menu: Press the pick-up button or talk button with a short press. Ending Voice Recognition Use one of the following methods: Press and hold the talk-button. Pres ...

2016-2022 Copyright www.mazda3tech.com