Mazda 3 Service Manual: Identification Number Locations

How To Use This Manual

Range of Topics This manual contains procedures for performing all required service operations. The procedures are divided into the following five basic operations: Removal/Inst ...

Jacking Positions, Vehicle Lift (2 Supports) And Safety Stand (Rigid Rack) Positions

Jacking Positions WARNING: Improperly jacking a vehicle is dangerous. The vehicle can slip off the jack and cause serious injury. Use only the correct front and rear jacking points and ...

Other materials:

Fuel Gauge Sender Unit Inspection
MZR 2.3 DISI Turbo, SKYACTIV-G 2.0 NOTE: The fuel gauge sender unit is integrated with the fuel pump unit. 1. Disconnect the negative battery cable.. 2. Remove the rear seat cushion.. 3. Remove the fuel pump unit.. 4. Verify that the resistance between terminals A and C of the f ...

Audio Unit Disassembly/Assembly
CAUTION: When disassembling the audio unit, it could get scratched if it is placed directly on the ground. When disassembling the audio unit, spread a soft cloth underneath to perform the work. 1. Disassemble in the order indicated in the table. 2. Assemble in the reverse order ...

Trunk Lid Key Cylinder Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the trunk lid trim.. 3. Lift the clip in the direction of the arrow (1), and pull out the key rod in the direction of the arrow (2). 4. Remove the nuts. 5. Remove the trunk lid key cylinder. 6. Install in the reverse order of r ...