Mazda 3 Service Manual: Ignition Coil Inspection [Mzr 2.0, Mzr 2.5]

Mazda 3 Service Manual / Electrical / Ignition / Ignition Coil Inspection [Mzr 2.0, Mzr 2.5]

Ignition Coil Inspection

1. Perform the spark test and identify the malfunctioning cylinder..

2. Replace the ignition coil of the malfunctioning cylinder with that of a normal cylinder, and perform the spark test again..

If the spark is not normal due to a malfunctioning ignition coil, replace that ignition coil.
It is unlikely that all four ignition coils fail to operate properly. To prevent replacing a normal component, perform the above procedure, identify the malfunctioning ignition coil, and replace it.

Forced Ignition On [With Advanced Keyless Entry And Push Button Start System]

NOTE: In order to perform a forced ignition ON, the M-MDS (IDS) is necessary. If the servicing is being done outside of an Authorized Mazda dealership, contact an Authorized Mazda dealer ...

Ignition Coil Removal/Installation [Mzr 2.0, Mzr 2.5]

1. Remove the battery cover.. 2. Disconnect the negative battery cable.. 3. Remove the plug hole plate.. 4. Remove in the order indicated in the table. 5. Install in the reverse order of remov ...

Other materials:

Instrumentation/Driver Info. Personalization Features Setting Procedure
Instrument Cluster 1. Connect the M-MDS (IDS) to the DLC–2. 2. After the vehicle is identified, select the following items from the initial screen of the M-MDS. Select the “Module Programming”. 3. Then, select items from the screen menu in the following order. Select “ ...

Non Return Valve Inspection [Skyactiv G 2.0]
WARNING: Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin and eyes. To prevent this, always complete the “Fuel Line Safety Procedure”, while referring to ...

Available Language (Type A)
The available languages are English, Spanish, and Canadian French. If the language setting is changed, all of the voice guidance and voice input commands are done in the selected language. NOTE If the language setting is changed, device registration is maintained. Phonebook records are ...