Mazda 3 Owners Manual: Indicator Lights
These lights turn on or flash to notify the user of the system operation status or a system malfunction.
|
Signal |
Indicator Lights |
 |
* BSM OFF Indicator Light |
 |
* Lane Departure Warning System (LDWS) Indicator Light |
 |
KEY Indicator Light |
 |
* High Beam Control System (HBC) Indicator Light |
 |
Wrench Indicator Light *1 |
 |
TCS/DSC Indicator Light *1 |
 |
DSC OFF Indicator Light *1 |
 |
* AFS OFF Indicator Light *1 |
 |
* Forward Obstruction Warning/Smart City Brake Support (FOW/SCBS) Indicator Light *1 |
 |
* Forward Obstruction Warning/Smart City Brake Support (FOW/SCBS) OFF Indicator Light *1 |
 |
* i-ELOOP Indicator Light |
 |
Low Engine Coolant Temperature Indicator Light |
 |
* Shift Position Indication |
 |
* SPORT Mode Indicator Light |
 |
Headlight High-Beam Indicator Light |
 |
Turn Signal/Hazard Warning Indicator Lights |
 |
Security Indicator Light *1 |
 |
* Mazda Radar Cruise Control (MRCC) Indicator Light |
 |
* Cruise Main Indicator Light |
 |
* Cruise Set Indicator Light |
 |
Lights-On Indicator Light |
*1 The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an Authorized Mazda Dealer.
Warning Lights
These lights turn on or flash to notify the user of the system operation
status or a system
malfunction.
Signal
Warning Lights
Master Warning Light *1
B ...
Wrench Indicator Light
When the ignition is switched ON, the
wrench indicator light is illuminated and
then turns off after a few seconds.
The wrench indicator light is illuminated
when the preset maintenance peri ...
Other materials:
Purge Solenoid Valve Removal/Installation [Mzr 2.0, Mzr 2.5]
1. Remove the battery cover..
2. Disconnect the negative battery cable..
3. Remove in the order indicated in the table.
1
Purge solenoid valve connector
2
Evaporative hose
(See Evaporative Hose Installation Note.)
3
...
Column Cover Removal/Installation
1. Pull down the steering wheel.
2. Pull the upper column cover in the direction of the arrow in the order of
(1) and (2), then remove the upper column cover while detaching the hooks and pins.
3. Pull up the steering wheel.
4. Remove the ignition key illumination..
5. Remove the scre ...
Afs (Adaptive Front Lighting System) Control Module Removal/Installation
NOTE:
Perform the auto leveling system initialization after newly replacing the
AFS control module to assure that the auto leveling system operates correctly.
1. Disconnect the negative battery cable..
2. Remove the following parts:
a. Passenger-side front scuff plate.
b. Pass ...
