Mazda 3 Service Manual: Instrument Cluster Disassembly/Assembly

Mazda 3 Service Manual / Body / Driver Info & Control / Instrument Cluster Disassembly/Assembly

CAUTION:

Do not drop the instrument cluster or damage the printed board. This will lead to a system malfunction.

1. Perform the instrument cluster configuration when replacing it..

2. Disconnect the negative battery cable..

3. Remove the column cover. (upper).

4. Remove the instrument cluster..

5. Remove the screws and clips.

6. Remove the screws.

7. Remove the cover.

8. Remove the screws from the cover.

9. Remove the instrument cluster rubber.

10. Remove the rings.

11. Detach the tabs

12. Detach the tabs.

13. Remove the lens.

14. Assemble in the reverse order of disassembly.

Instrument Cluster Configuration

1. Connect the M-MDS (IDS) to the DLC-2. 2. After the vehicle is identified, select the following items from the initialization screen of the IDS. Select the “Module Programming”. ...

Instrument Cluster Inspection

Speedometer Using a speedometer tester CAUTION: When only the front or the rear wheels are driven using a speedometer tester, the ABS or DSC may determine that the vehicle speed signal is ...

Other materials:

Windshield Removal
1. Disconnect the negative battery cable. 2. Remove the following parts: a. Windshield wiper arm and blade. b. Cowl grille. c. Rain sensor (Vehicles with auto light/wiper system). d. Auto-dimming mirror (Vehicles with auto-dimming mirror). e. Rear view mirror (Vehicles without auto-dimmi ...

Mass Air Flow (MAF) Sensor Inspection [Mzr 2.0, Mzr 2.5]
Visual Inspection 1. Remove the battery cover.. 2. Disconnect the negative battery cable.. 3. Disconnect the MAF/IAT sensor connector. 4. Remove the MAF/IAT sensor.. 5. Visually inspect the MAF/IAT sensor for the following: Damage, cracks, soiling Rusted sensor terminal ...

Cruise Control Set Vehicle Speed Display
The vehicle speed preset using the cruise control is displayed. Trip Computer and INFO Switch The following information can be selected by pressing the up or down part of the INFO switch with the ignition switched ON. Approximate distance you can travel on the available fuel Ave ...