Mazda 3 Service Manual: Instrument Cluster Removal/Installation

Mazda 3 Service Manual / Body / Driver Info & Control / Instrument Cluster Removal/Installation

CAUTION:

When replacing the instrument cluster, the configuration procedure must be performed before removing the instrument cluster. Replacing the instrument cluster without performing the configuration procedure will result in system malfunction.

1. Perform the instrument cluster configuration when replacing it..

2. Disconnect the negative battery cable..

3. Remove the column cover. (upper).

4. Remove the screws.

5. Pull the instrument cluster outward and remove it

6. Disconnect the connector.

7. Remove the clip.

8. Install in the reverse order of removal.

9. Program the immobilizer system-related parts when replacing the instrument cluster. (With keyless entry system).

CAUTION:

The removed instrument cluster should be placed with the display side up to prevent grease from leaking from the meters.

Instrument Cluster Inspection

Speedometer Using a speedometer tester CAUTION: When only the front or the rear wheels are driven using a speedometer tester, the ABS or DSC may determine that the vehicle speed signal is ...

Instrumentation/Driver Info. Personalization Features Setting Procedure

Instrument Cluster 1. Connect the M-MDS (IDS) to the DLC–2. 2. After the vehicle is identified, select the following items from the initial screen of the M-MDS. Select the “Module Pro ...

Other materials:

DSC HU/CM Inspection
1. Disconnect the DSC HU/CM connector.. 2. Connect the negative battery cable.. 3. Attach the tester lead to the DSC HU/CM wiring harness-side connector and inspect voltage, continuity, or resistance according to the standard (reference) on the table. Standard (Reference) ...

Engine Disassembly/Assembly [Skyactiv G 2.0]
CAUTION: When the transaxle is installed, do not suspend the engine. Otherwise, the SST installation area of the cylinder head may be damaged due to excess weight. Only suspend the engine after separating the engine and transaxle. Applying excessive force (force of 100 N {10.2 ...

Engine Removal/Installation [Mzr 2.3 Disi Turbo]
WARNING: Fuel vapor is hazardous. It can very easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel. Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin ...