Mazda 3 Service Manual: Intake

Quick Release Connector Removal/Installation [Mzr 2.0, Mzr 2.5]

WARNING: Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin ...

Air Cleaner Element Inspection [Mzr 2.0, Mzr 2.5]

1. Remove the air cleaner element.. 2. Inspect the following items: Has the replacement interval come? Is the air cleaner element soiled, damaged, or bent? Are the air cleane ...

Other materials:

Front Door Key Cylinder Switch Inspection
1. To access the glass installation bolt, position the front door glass so that the distance from the top of the front door glass to the upper part of the front beltline molding is approx. 80 mm {3.1 in}. 2. Disconnect the negative battery cable.. 3. Remove the following parts: a. Inne ...

DSC HU/CM Removal/Installation
WARNING: If the DSC HU/CM configuration is not completed, it could result in an unexpected accident due to the DSC being inoperative. If the DSC HU/CM is replaced, always use the automatic configuration function so that the DSC operation conditions are correct. If the DSC se ...

Drive Plate Removal/Installation [FS5 A EL]
1. Remove the transaxle.. 2. Remove in the order indicated in the table. 1 Drive plate installation bolts (See Drive Plate Installation Bolts Removal Note.) (See Drive Plate Installation Bolts Installation Note.) 2 Backing plate ...