Mazda 3 Owners Manual: Laser Sensor (Front)

Mazda 3 Owners Manual / When Driving / i-ACTIVSENSE / Laser Sensor (Front)

The Smart City Brake Support (SCBS) laser sensor is installed at the top of the windshield near the rearview mirror.

Mazda 3. Laser Sensor (Front)

Always keep the surface of the windshield around the laser sensor clean to assure proper operation of the Smart City Brake Support (SCBS) system.

WARNING As there is the possibility of eye damage occurring from the laser, always heed the following precautions:

Never remove the sensor.
A removed sensor will not meet the conditions for a class 1M laser under the IEC 60825-1 specifi cation and therefore eye safety cannot be assured.
Do not peer into the sensor using optical instruments with a magnifi cation function such as magnifying glasses, and microscopic and objective lenses within a distance of 100 mm (3.94 in) from the sensor.

Mazda 3. Laser Sensor (Front)

Laser sensor radiation data Maximum average power: 45 mW Pulse duration: 33 ns
Wavelength: 905 nm
Divergence angle (horizontal×vertical): 28 degrees×12 degrees

Radar Sensor (Front)

Your vehicle is equipped with a radar sensor (front). The following systems also use the radar sensor (front). Mazda Radar Cruise Control (MRCC) Forward Obstruction Warning (FOW) The radar ...

Radar Sensors (Rear)

The radar sensors (rear) for the rear vehicle monitoring system are equipped inside the rear bumper, one each on the left and right sides. Sedan Hatchback The surface area of the rear bu ...

Other materials:

Operational Range
WARNING Always take all children and pets with you or leave a responsible person with them: Leaving a child or a pet unattended in a parked vehicle is dangerous. In hot weather, temperatures inside a vehicle can become high enough to cause brain damage or even death. ...

Traction Control System (TCS)
The Traction Control System (TCS) enhances traction and safety by controlling engine torque and braking. When the TCS detects driving wheel slippage, it lowers engine torque and operates the brakes to prevent loss of traction. This means that on a slick surface, the engine adjusts automatic ...

Manual Transaxle Removal/Installation [C66 M R]
1. Remove the battery cover.. 2. Disconnect the negative battery cable.. 3. Remove the aerodynamic under cover No.2 and the splash shield as a single unit.. 4. Drain the manual transaxle oil.. 5. Disconnect and/or remove the following parts in the engine compartment. a. Remove the batte ...