Mazda 3 manuals

Mazda 3 Service Manual: Lubrication

Mass Air Flow (MAF) Sensor/Intake Air Temperature (Iat) Sensor No.1 Removal/Installation [Skyactiv G 2.0]
CAUTION: Be careful not to hit the sensor element or allow foreign matter to get on it during sensor removal/installation. If the sensor element is hit or foreign matter gets on it, an e ...

Electric Power Steering Oil Pump Component Disassembly/Assembly
CAUTION: The internal parts of the EHPAS control module and motor could be damaged if they receive an impact. Be careful when handling the EHPAS control module and motor to prevent the c ...

Other materials:

Transaxle Oil Inspection [G35 M R]
1. Park the vehicle on level ground. 2. Remove the aerodynamic under cover No.2.. 3. Remove the oil level plug and washer. 4. Verify that the oil is near the brim of the plug port. If the oil level is lower than the low level, add the specified amount and type of oil through the ...

If a Warning Light Turns On or Flashes
If any warning light turns on/flashes, take appropriate action for each light. There is no problem if the light turns off, however if the light does not turn off or turns on/flashes again, consult an Authorized Mazda Dealer. (Vehicles with type B audio) The warning contents can be verified o ...

Applicable Bluetooth ® specification (Recommended)
Ver. 1.1/1.2/2.0 EDR/2.1 EDR/3.0 (conformity) Response profile A2DP (Advanced Audio Distribution Profile) Ver. 1.0/1.2 AVRCP (Audio/Video Remote Control Profile) Ver. 1.0/1.3/1.4 A2DP is a profile which transmits only audio to the Bluetooth ® unit. If your Bluetooth ® audio device c ...

© 2016-2024 Copyright www.mazda3tech.com