Mazda 3 Service Manual: Navigation

Tweeter Removal/Installation

1. Disconnect the negative battery cable.. 2. Remove the inner garnish.. 3. Remove the tweeter in the direction of the arrow shown in the figure. 4. Install in the reverse order of removal. ...

Car Navigation System

Outline The car-navigation system displays point-of-origin and road guidance maps via the audio unit display and provides guidance and information to the desired point of destination. ...

Other materials:

Rear Scuff Plate Removal/Installation
1. Detach tab A while pulling the rear scuff plate in the direction of the arrow (1) shown in the figure, then detach hook B, clips C, pins D while pulling in the direction of the arrow (2). 2. Detach tab E while pulling the rear scuff plate in the direction of the arrow (3) shown in the fig ...

Information on Passenger Vehicle Tires
Please refer to the sample below. TIN: U.S. DOT tire identification number Passenger car tire Nominal width of tire in millimeters Ratio of height to width (aspect ratio) Radial Run-flat tire Rim diameter code Load index & speed symbol Severe snow conditions Tire ply co ...

Keyless Control Module Removal/Installation
1. If the keyless control module is replaced, always perform the following procedure. Vehicles with immobilizer system Keyless Control Module Configuration. Immobilizer System-related Parts Programming [No.4 Programming Procedure Due to Keyless Control Module Rep ...