Mazda 3 manuals

Mazda 3 Service Manual: Oil Pressure Switch Removal/Installation [FS5 A EL]

Mazda 3 Service Manual / Engine / Lubrication / Oil Pressure Switch Removal/Installation [FS5 A EL]

WARNING:

1. Perform the following procedures.

a. Remove the battery cover..

b. Disconnect the negative battery cable.

c. Remove the aerodynamic under cover NO.2..

2. Remove in the order indicated in the table.



1

Connector

2

Oil pressure switch

3

Washer


3. Install in the reverse order of removal.

Oil Pressure Switch Removal
MZR 2.0, MZR 2.5, MZR 2.3 DISI Turbo WARNING: A hot engine can cause severe burns. Turn off the engine and wait until it is cool before removing the exhaust system. 1. Disconnect the ...

HVAC
...

Other materials:

Steering Wheel And Column Removal/Installation [Without Advanced Keyless Entry And Push Button Start System]
WARNING: Handling the air bag module improperly can accidentally operate (deploy) the air bag module, which may seriously injure you. Read the service warnings before handling the air bag module.. 1. Remove the driver-side front scuff plate.. 2. Remove the driver-side front sid ...

Replacing a Tire
WARNING Always use tires that are in good condition: Driving with worn tires is dangerous. Reduced braking, steering, and traction could result in an accident. If a tire wears evenly, a wear indicator will appear as a solid band across the tread. Replace the tire when ...

Engine Coolant Replacement [Mzr 2.0, Mzr 2.5]
WARNING: Never remove the cooling system cap or loosen the radiator drain plug while the engine is running, or when the engine and radiator are hot. Scalding engine coolant and steam may shoot out and cause serious injury. It may also damage the engine and cooling system. Tu ...

© 2016-2024 Copyright www.mazda3tech.com