Fluid Level Inspection
1. Verify that the fluid level is between MAX and MIN of the sub tank when the engine is cold.
If the fluid is not at the specified level, adjust the fluid level (MIN-MAX on sub tank) by adding/draining the fluid.
Mazda Genuine ATF M-III, M-V or equivalent (e.g. Dexron ® II)
1.0 L {1.1 US qt, 0.88 lmp qt}
Fluid Leakage Inspection
1. Start the engine and idle it.
2. Turn the steering wheel fully to left or right, to generate the fluid pressure.
CAUTION:
Do not maintain the steering wheel fully turned for 5 s or more. It is possible that oil temperature can rise and this will negatively affect the oil pump.
3. Inspect for the fluid leakage at the points indicated in the figure.
If fluid leakage is found, repair or replace the related parts..
Displayable Range on the Screen
The images on the screen may be different from the actual conditions.
NOTE
The displayable range varies depending on the vehicle and road
conditions.
The displayable range is limited. Objects under the bumper or around
the bumper ends
cannot be displayed.
The distance appearing ...
Outside Mirrors
WARNING
Be sure to look over your shoulder
before changing lanes:
Changing lanes without taking
into account the actual distance of
the vehicle in the convex mirror is
dangerous. You could have a serious
accident. What you see in the convex
mirror is closer than it app ...
Electric Power Steering Oil Pump Component Removal/Installation
CAUTION:
Be careful not to drop the electric power steering oil pump component as
the internal parts of the EHPAS CM could be damaged. Replace the electric power
steering oil pump component if it is subjected to an impact.
1. Remove the front mudguard (RH)..
2. Remove the aerod ...