Mazda 3 Service Manual: Rearview Mirror Removal
1. Insert a tape-wrapped flathead screwdriver to the position shown in the figure and press the center part of the spring in the direction of arrows (1), and then pull out the rearview mirror in the direction of arrows (2) shown in the figure.
CAUTION:
-
When removing the rearview mirror, it may hit the headliner and cause damage.
-
Hold the rearview mirror with hands and be careful not to contact it with the headliner.
Rearview Mirror Installation
1. Install the rearview mirror onto the base.
2. Connect the negative battery cable. (vehicles with auto light/wiper system).
...
Vanity Mirror Illumination Bulb Removal/Installation
1. Disconnect the negative battery cable..
2. Insert a tape-wrapped fastener remover into the service hole, and pry it in
the direction indicated by the arrow to remove the lens.
3. Remove t ...
Other materials:
Unfastening the Seat Belt
Depress the button on the seat belt buckle.
If the belt does not fully retract, pull it out
and check for kinks or twists. Then make
sure it remains untwisted as it retracts.
NOTE
If a belt does not fully retract, inspect
it for kinks and twists. If it is still not
retracting properly, ...
Brakes SST
49 D043 0A0
Adapter set
49 U043 0A0A
Oil pressure gauge set
49 0221 600C
Disc brake expand tool
49 B033 001
Installer
49 G033 102
Handle
...
Rear Seat Back Frame Removal/Installation
1. Remove the rear seat cushion..
2. Remove the rear buckle installation bolt..
3. Remove the rear seat back..
4. Remove the headrest.
5. Open the fasteners.
6. Detach the hooks.
7. Remove the child-restraint seat anchor covers in the order of (1), (2) as
shown in the figure. (5H ...
