When an incoming call is received, the incoming call notification screen is displayed. The “Incoming Call Notifications” setting must be on.
Refer to Communication Settings on .
To accept the call, press the pick-up button on the audio control switch or
select on
the screen.
To reject the call, press the hang-up button on the audio control switch or
select on the
screen.
The following icons are displayed on the screen during a call. Icons which can be used differ depending on use conditions.
Icon |
Function |
Displays the Communication menu. | |
Ends the call. | |
Transferring a call from hands-free to a mobile phone Communication between the Bluetooth ® unit and a device (mobile phone) is canceled, and an incoming call will be received by the device (mobile phone) like a standard call. | |
Transferring a call from a device (mobile phone) to hands-free Communication between devices (mobile phone) can be switched to Bluetooth ® Hands- Free. | |
Mute The microphone can be muted during a call. When selected again, the mute is canceled. |
|
A call is made to other person during a call and a 3-way call can be
made. Select the contact
from the following to make a call.
: Call History is
: The phonebook is
: The dial pad is
The device may be unusable depending on the contractual content. |
|
The call on hold is made to make a 3-way call. The device may be unusable depending on the contractual content. |
|
Switches the call on hold. | |
DTMF (Dual Tone Multi-Frequency Signal) Transmission
This function is used when transmitting DTMF via the dial pad. The
receiver of a DTMF
transmission is generally a home telephone answering machine or a
company's automated
guidance call center. Input the number using a dial pad. |
NOTE
Power Window System Preliminary Inspection [Power Window System]
Manual Open/close Function Inspection
STEP
INSPECTION
ACTION
1
Switch the ignition to ON.
Operate the power window using the manual open/close function on
the power window main switch.
...
Operational Range
The system operates only when the driver
is in the vehicle or within operational
range while the key is being carried.
Starting the Engine
NOTE
Starting the engine may be possible
even if the key is outside of the vehicle
and extremely close to a door and
window, however, always start ...
Starter Interlock Switch Inspection [Mzr 2.3 Disi Turbo]
CAUTION:
Do not reuse the starter interlock switch if it is removed from the vehicle
even once. Replace with a new starter interlock switch when installing.
1. Remove the battery cover..
2. Disconnect the negative battery cable..
3. Disconnect the starter interlock switch connec ...