Mazda 3 Owners Manual: Replacing a Wheel

Mazda 3 Owners Manual / Maintenance and Care / Owner Maintenance / Tires / Replacing a Wheel

WARNING Always use wheels of the correct size on your vehicle: Using a wrong-sized wheel is dangerous. Braking and handling could be aff ected, leading to loss of control and an accident.

CAUTION A wrong-sized wheel may adversely aff ect:

Tire fit
Wheel and bearing life
Ground clearance
Snow-chain clearance
Speedometer calibration
Headlight aim
Bumper height
Tire Pressure Monitoring System *

NOTE

When replacing a wheel, make sure the new one is the same as the original factory wheel in diameter, rim width, and offset (inset/outset).
For details, contact an Authorized Mazda Dealer.

Proper tire balancing provides the best riding comfort and helps reduce tread wear. Out-of-balance tires can cause vibration and uneven wear, such as cupping and flat spots.

Temporary Spare Tire

Inspect the temporary spare tire at least monthly to make sure it is properly inflated and stored. NOTE The temporary spare tire condition gradually deteriorates even if it has not been used. T ...

Light Bulbs

WARNING Do not replace the xenon fusion bulbs yourself: Replacing the xenon fusion bulbs yourself is dangerous. Because the xenon fusion bulbs require high voltage, yo ...

Other materials:

Fuel Tank Removal/Installation [Mzr 2.0, Mzr 2.5]
WARNING: Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin and eyes. To prevent this, always complete the “Fuel Line Safety Procedure”, while referring to ...

Control Valve Body Removal/Installation [FS5 A EL]
Primary Control Valve Body On-Vehicle Removal WARNING: A hot transaxle and ATF can cause severe burns. Turn off the engine and wait until they are cool. Using compressed air can cause dirt and other particles to fly out, causing injury to the eyes. Wear protective eyeglasses w ...

Maintenance of the Active Driving Display
The combiner and mirror surface have a special coating. When cleaning, do not use a hard or rough-surface cloth, or cleaning detergent. In addition, if a chemical solvent gets on the active driving display, wipe it off immediately. Otherwise, the combiner and mirror could be damaged and the s ...