Mazda 3 Service Manual: Restraints SST [Standard Deployment Control System]

Pressure Sensor Removal/Installation [Two Step Deployment Control System]

1. Switch the ignition to off. 2. Disconnect the negative battery cable and wait for 1 min or more.. 3. Remove the inner garnish.. 4. Remove the front door trim.. 5. Remove the bolts. 6 ...

Restraints SST [Two Step Deployment Control System]

49 H066 002 Deployment tool 49 D066 002 Adapter harness 49 L066 002 Adapter harness 49 G066 ...

Other materials:

Side Air Bag Sensor No. 1 Removal/Installation [Two Step Deployment Control System]
WARNING: Handling the side air bag sensor improperly can accidentally operate (deploy) the air bag module, which may seriously injure you. Read the air bag system service warnings and cautions before handling the side air bag sensor.. 1. Switch the ignition to off. 2. Disconnec ...

Air Filter Removal/Installation [Mzr 2.0, Mzr 2.5]
Except for Mexico 1. Remove the fuel-filler pipe protector.. 2. Remove in the order indicated in the table. 1 Evaporative hose 2 Air filter 3. Install in the reverse order of removal. ...

Instrument Cluster Configuration
1. Connect the M-MDS (IDS) to the DLC-2. 2. After the vehicle is identified, select the following items from the initialization screen of the IDS. Select the “Module Programming”. 3. Then, select items from the screen menu in the following order. Select “Programmable Mo ...