Mazda 3 Service Manual: Restraints SST [Two Step Deployment Control System]

Restraints SST [Standard Deployment Control System]

49 H066 002 Deployment tool 49 D066 002 Adapter harness 49 L066 002 Adapter harness ...

Adjuster Anchor Removal/Installation

WARNING: The side air bag sensor is attached to the lower part of the B-pillar. When working around the B-pillar, disconnect the negative battery cable or work carefully, avoiding exce ...

Other materials:

Antenna Feeder No.6 Inspection
1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Upper panel. b. Shift knob (MTX). c. Selector lever knob (ATX). d. Shift panel. e. Side wall. f. Console. g. Car-navigation unit. 3. Verify that the continuity between antenna feeder No.6 terminals is as i ...

TCM Removal/Installation [FS5 A EL]
CAUTION: Do not apply a shock to or touch the projection on the TCM, otherwise it may not operate normally. 1. Perform the following procedures. a. Remove the battery cover.. b. Disconnect the negative battery cable. c. Remove the battery component (ex: battery, battery tray a ...

Auto Dimming Mirror Inspection
1. Measure the voltage at each terminal. If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under “Inspection item (s)” and related wiring harnesses. If the system does not work properly even though the inspection items or rela ...