Mazda 3 Service Manual: Roof - Fixed, Leisure

Power Outer Mirror Switch Removal/Installation

NOTE: The power outer mirror switch is integrated with the power window main switch. 1. Disconnect the negative battery cable.. 2. Remove the inner garnish. (driver’s side). 3. Remov ...

Deflector Removal/Installation

1. Fully open the glass panel. 2. Press the spring in the direction shown by the arrow and remove it from the hook. 3. Remove the deflector. 4. Install in the reverse order of removal. ...

Other materials:

Operating the Radio
Radio ON Press a band selector button ( ) to turn the radio on. Band selection Successively pressing the band selector button ( ) switches the bands as follows: FM1→FM2→AM. The selected mode will be indicated. NOTE If the FM broadcast signal becomes weak, reception auto ...

Brake Pedal Inspection
Pedal Height Inspection 1. Measure the distance from the center of the upper surface of the pedal pad to the floor covering and verify that it is as specified. If not within the specification, replace the brake pedal. Brake pedal height (reference value) MZR 2.0, SKYACTI ...

Expansion Valve Removal/Installation
1. Disconnect the negative battery cable.. 2. Discharge the refrigerant from the system.. CAUTION: If moisture or foreign material enters the refrigeration cycle, cooling ability will be lowered and abnormal noise will occur. Always immediately plug all open fittings after removing ...