Mazda 3 Service Manual: Seat Warmer Switch Inspection
1. Remove the battery cover..
2. Disconnect the negative battery cable..
3. Inspect for resistance and continuity between the seat warmer switch terminals using a tester.
-
If not as specified, replace the seat warmer switch.
Seat Track Position Sensor Removal/Installation [Two Step Deployment Control
System]
1. Switch the ignition to off.
2. Disconnect the negative battery cable and wait for 1min or more..
3. Remove the front driver’s seat..
4. Remove the front seat slide adjuster..
5. Remove the ...
Seat Warmer Switch Removal/Installation
1. Remove the battery cover..
2. Disconnect the negative battery cable..
3. Remove the shift panel..
4. Squeeze the tabs of seat warmer switch and pull it outward to remove it.
5. Remove ...
Other materials:
Warning Lights
These lights turn on or flash to notify the user of the system operation
status or a system
malfunction.
Signal
Warning Lights
Master Warning Light *1
Brake System Warning Light *1*2
ABS Warning Light *1
Charging System Warnin ...
Drive Belt Removal/Installation [Skyactiv G 2.0]
WARNING:
A hot engine can cause severe burns. Turn off the engine and wait until it
is cool before servicing.
NOTE:
Remove/install the drive belt from the underside of the vehicle.
Generator Drive Belt Removal/Installation
CAUTION:
To prevent damage to the dri ...
Home screen
Icon
Function
Applications
Information such as average fuel economy, maintenance, and warnings can
be verified.
Depending on the grade and specification, the screen display may
differ.
Entertainment
Operates audio such as the radio ...
