Mazda 3 Service Manual: Sensors, Switches, Relays

Vanity Mirror Illumination Inspection

1. Disconnect the negative battery cable.. 2. Remove the sunvisor.. 3. Verify that the continuity between the vanity mirror illumination terminals is as indicated in the table. If no ...

Light Switch Inspection

Vehicles Without Auto Light System 1. Disconnect the negative battery cable.. 2. Remove the column cover.. 3. Remove the light switch.. 4. Verify that the continuity between the light switch te ...

Other materials:

Stop Vehicle in Safe Place Immediately
If any of the following warning lights turns on, the system may have a malfunction. Stop the vehicle in a safe place immediately and contact an Authorized Mazda Dealer. ...

Rear Door Pad Removal/Installation
1. Fully open the rear door glass. 2. Disconnect the negative battery cable.. 3. Remove the following parts: a. Rear door trim. b. Rear door speaker. c. Rear power window motor. d. Rear door quarter glass. e. Rear door glass. f. Rear door module panel. 4. Remove the service hole co ...

Check Valve (One Way) Inspection [Mzr 2.3 Disi Turbo]
1. Disconnect the vacuum hose connected between the check valve and the purge solenoid valve from the purge solenoid valve.. 2. Disconnect the vacuum hose connected between the check valve (one-way) and the intake manifold from the intake manifold.. 3. Blow through the check valve (one-way) ...