Mazda 3 Service Manual: Sirius Satellite Radio Antenna Feeder Removal/Installation

Sirius Satellite Radio Antenna Feeder Inspection

SIRIUS Satellite Radio Antenna Feeder No.1 NOTE: SIRIUS satellite radio antenna feeder No.1 is integrated with the dashboard wiring harness. 1. Disconnect the negative battery cable. ...

Sirius Satellite Radio Unit Removal/Installation

1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Passenger-side front scuff plate. b. Passenger-side front side trim. c. Dashboard under cover. d. Grove compartme ...

Other materials:

Hill Launch Assist (HLA)
Hill Launch Assist (HLA) is a function which assists the driver in accelerating from a stop while on a slope. When the driver releases the brake pedal and depresses the accelerator pedal while on a slope, the function prevents the vehicle from rolling. The braking force is maintained automati ...

Drive Belt Removal/Installation [Mzr 2.0, Mzr 2.5]
MZR 2.0 A/C drive belt removal 1. Remove the aerodynamic under cover No.2 and splash shield as a single unit.. 2. Remove the nut shown in the figure and set the power steering pipe component out of the way. 3. Set the SST as shown in the figure. NOTE: Hold the SST by hand unti ...

Overheating
If the high engine coolant temperature warning light illuminates, the vehicle loses power, or you hear a loud knocking or pinging noise, the engine is probably too hot. WARNING Switch the ignition to off and make sure the fan is not running before attempting to work near the co ...