Mazda 3 manuals

Mazda 3 Service Manual: Spark Plug Removal/Installation [Mzr 2.3 Disi Turbo]

Mazda 3 Service Manual / Electrical / Ignition / Spark Plug Removal/Installation [Mzr 2.3 Disi Turbo]

CAUTION:

1. Remove the battery cover..

2. Disconnect the negative battery cable..

3. Remove the charge air cooler..

4. Remove the ignition coils..

5. Remove the spark plugs using a plug-wrench.

6. Install in the reverse order of removal.

Spark Plug Removal/Installation [Mzr 2.0, Mzr 2.5]
CAUTION: If a spark plug that is not as specified is installed, engine performance will be deteriorated. Install only the specified spark plug when replacing. 1. Remove the battery co ...

Spark Plug Removal/Installation [Skyactiv G 2.0]
CAUTION: If a spark plug that is not as specified is installed, engine performance will be deteriorated. Install only the specified spark plug when replacing. 1. Remove the battery co ...

Other materials:

Compression Inspection [Mzr 2.3 Disi Turbo]
WARNING: Hot engines and oil can cause severe burns. Be careful not to burn yourself during removal/installation of each component. Fuel vapor is hazardous. It can very easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel. Fuel ...

No.6 Bsm Indicator Light Flashes While Not Under Bsm Indicator Light Flashing Conditions (No Combination Switch Operation (Turn Signal Switch)) [Blind Spot Monitoring (Bsm)]
6 BSM indicator light flashes while not under BSM indicator light-flashing conditions (no combination switch operation (turn signal switch) Description The BSM indicator light flashes despite not satisfying the BSM indicator l ...

Sunroof Motor Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the rain sensor cover. (Vehicles with auto light/wiper system). 3. Disconnect the rain sensor connector. (Vehicles with auto light/wiper system) 4. Partially peel back the seaming welts. 5. Remove the following parts: a. Sunroof seaming ...

© 2016-2024 Copyright www.mazda3tech.com