CAUTION:
If the sunshade is forced close while the sunroof is open, the sunshade could be damaged.
1. Disconnect the negative battery cable..
2. Remove the rain sensor cover. (Vehicles with auto light/wiper system).
3. Disconnect the rain sensor connector. (Vehicles with auto light/wiper system)
4. Partially peel back the seaming welts.
5. Remove the following parts:
a. Sunroof seaming welt
b. A–pillar trim.
c. Front scuff plate.
d. Rear scuff plate.
e. B-pillar lower trim.
f. Upper anchor of the front seat belt.
g. B-pillar upper trim.
h. Rear seat cushion.
i. Tire house trim.
j. Trunk side upper trim (5HB).
k. C–pillar trim.
l. Map light.
m. Sunvisor.
n. Assist handle.
o. Headliner.
6. Disconnect the front and rear drain hose from the sunroof frame.
7. Disconnect the sunroof motor connector.
8. Remove the bolts.
9. Remove the nuts, and then remove the sunroof unit.
10. Install in the reverse order of removal.
11. Adjust the glass panel..
Registering Your Vehicle in A Foreign
Country (Except United States and
Canada)
Registering your vehicle in a foreign country may be problematic depending on
whether it
meets the specific emission and safety standards of the country in which the
vehicle will be
driven. Consequently, your vehicle may require modifications at personal expense
in order
to meet the regulat ...
Glass Antenna Inspection
4SD
1. Disconnect the negative battery cable..
2. Disconnect the antenna amplifier connector B..
3. Disconnect the antenna feeder No.3 connector C. (with audio unit (with display)).
4. Inspect the glass antenna for damage visually.
5. Inspect for continuity between the glass antenna termin ...
How to connect USB port/ Auxiliary jack
Type A (Without CD player)
Type A (With CD player)
Type B (Without CD player)
Type B (With CD player)
Connecting a device
Open the console lid (with CD player).
If there is a cover on the AUX jack or
USB port, remove the cover.
Connect the connector on the device to
t ...