Mazda 3 manuals

Mazda 3 Owners Manual: Transmitter

Mazda 3. Transmitter


NOTE

  1. Switch the ignition off and close all of the doors and the liftgate/trunk lid.
  2. Open the driver's door.
  3. Within 30 seconds of opening the driver's door, press and hold the LOCK button on the key for 5 seconds or longer.

    All of the doors and the liftgate/ trunk lid lock and the beep sound activates at the currently set volume.

    (If the beep sound is currently set to not activate, it will not activate.) The setting changes each time the LOCK button on the key is pressed and the beep sound activates at the set volume. (If the beep sound has been set to not activate, it will not activate.)

  4. The setting change is completed by doing any one of the following:

The operation indicator light flashes when the buttons are pressed.

Lock button

To lock the doors and the liftgate/trunk lid, press the lock button and the hazard warning lights will flsh once.

(With the advanced keyless function) A beep sound will be heard once.

To confirm that all doors and the liftgate/ trunk lid have been locked, press the lock button again within 5 seconds. If they are closed and locked, the horn will sound.


NOTE

Unlock button

To unlock the driver's door, press the unlock button and the hazard warning lights will flash twice.

(With the advanced keyless function) A beep sound will be heard twice.

To unlock all doors and the liftgate/trunk lid, press the unlock button again within 3 seconds and two more beep sounds will be heard.


NOTE

  1. Switch the ignition off and close all of the doors and the liftgate/trunk lid.
  2. Open the driver's door.
  3. Within 30 seconds of opening the driver's door, press and hold the UNLOCK button on the key for 5 seconds or longer. The sound of the doors locking/unlocking can be heard.

    After this, the system switches the setting each time the UNLOCK button is pressed (the sound of the doors locking/unlocking can be heard).

  4. The setting change is completed by doing any one of the following:

Auto re-lock function)

Trunk button (4–door)

To open the trunk lid, press and hold the trunk button until the trunk lid opens.

Mazda 3. Trunk button


Panic button

If you witness from a distance someone attempting to break into or damage your vehicle, press and hold the panic button to activate the vehicle's alarm.

Mazda 3. Panic button


NOTE The panic button will work whether any door or the liftgate/trunk lid is open or closed.

(Turning on the alarm)

Pressing the panic button for 1 second or more will trigger the alarm for about 2 minutes and 30 seconds, and the following will occur:

Keyless Entry System
This system uses the key buttons to remotely lock and unlock the doors and the liftgate/trunk lid, and opens the trunk lid. The system can start the engine without having to take the key out of ...

Operational Range
The system operates only when the driver is in the vehicle or within operational range while the key is being carried. Starting the Engine NOTE Starting the engine may be possible even if th ...

Other materials:

Glove Compartment Removal/Installation
CAUTION: If the glove compartment is closed without being joined to the stay damper, the stay damper may be damaged. Verify that the stay damper is joined to the glove compartment before closing the glove compartment. 1. Pull the stay damper in the direction (1) shown in the figu ...

Identification Number Locations
Vehicle Identification Number (VIN) Engine Type/Number MZR 2.0, MZR 2.5 MZR 2.3 DISI Turbo SKYACTIV-G 2.0 ...

Rear Combination Light Removal/Installation
4SD 1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Trunk mat. b. Trunk board. c. Trunk end trim. d. Trunk side trim. 3. Disconnect the connectors shown in the figure and remove the nuts. 4. Pull the rear combination light in the direction of the arrow ...

© 2016-2024 Copyright www.mazda3tech.com