Mazda 3 Service Manual: Valvetrain, Cylinder Head

Crankshaft Position (CKP) Sensor Removal/Installation [Mzr 2.0, Mzr 2.5]

Removal CAUTION: When foreign material such as an iron chip is on the CKP sensor, it can cause abnormal output from the sensor because of flux turbulence and adversely affect the engine ...

Camshaft Position (CMP) Sensor Inspection [Mzr 2.0, Mzr 2.5]

Visual Inspection CAUTION: When replacing the CMP sensor, make sure there is no foreign material on it such as metal shavings. If it is installed with foreign material, the sensor outpu ...

Other materials:

Cylinder Head Gasket Replacement [Mzr 2.0, Mzr 2.5]
WARNING: Fuel vapor is hazardous. It can very easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel. Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin ...

Variable Tumble Solenoid Valve Inspection [Mzr 2.0, Mzr 2.5]
Airflow Inspection 1. Remove the battery cover.. 2. Disconnect the negative battery cable.. 3. Remove the variable tumble solenoid valve.. 4. Inspect airflow between the ports under the following conditions. If not as specified, replace the variable tumble solenoid valve.. ...

i-ACTIVSENSE
i-ACTIVSENSE is a collective term covering a series of advanced safety and driver support systems which make use of a Forward Sensing Camera (FSC) and radar sensors. These systems consist of active safety and pre-crash safety systems. These systems are designed to assist the driver in safer ...