NOTE Depending on the grade and specification, the screen display may differ.
Select the icon on the home
screen and display the Settings screen.
Switch the tab and select the setting item you want to change.
You can customize settings in the setup display as follows:
Tab |
Item |
Function |
|
AD-Disp | Height
Brightness Control Other |
Refer to Active Driving Display on . | |
Display | Refer to Volume/Display/Sound Controls on . | ||
Safety | Smart City Brake Support Blind Spot Monitoring Volume Other | Refer to Personalization Features on . | |
Sound | Refer to Volume/Display/Sound Controls on . | ||
Clock | Adjust Time | Displays the currently set time is displayed. Press + to advance the hour/minute, and select - to move the hour/minute back. AM/PM can only be selected with the 12-hour clock display |
|
GPS Sync | When ON is selected, “Adjust Time” is disabled. | ||
Time Format | Changes the display between 12 and 24-hour clock time. | ||
Time Zone Select | Selects the time zone. | ||
Daylight Savings Time | Turns the daylight saving time setting on/off. When ON, the time advances 1 hour. When OFF, it returns to normal time. |
||
Vehicle | Rain Sensing Wiper
Door Locks Other |
Refer to Personalization Features on . | |
Devices | Bluetooth ® | Refer to Bluetooth ® Preparation (Type B) on . | |
System | Tool Tips | Turns button explanations ON/OFF. | |
Language | Changes the language | ||
Temperature | Changes the setting between Fahrenheit and Celsius | ||
Distance | Changes the setting between miles and kilometers | ||
Music Database Update | Used to update Gracenote ® . Gracenote is used
with USB Audio, and provides:
Gracenote can be downloaded from the Mazda Handsfree Website. Refer to Gracenote Database (Type B) on . |
||
Restore All Factory Settings | Memory and settings are initialized to the
factory settings.
The initialization launches by selecting the
|
||
About | Agreements and Disclaimers | Verify the disclaimer and agree. | |
Version Information | Can verify the current audio unit OS version and Gracenote Database version. |
Front Bumper Removal/Installation
1. Disconnect the negative battery cable..
2. Remove the screw A and fasteners B.
3. Remove the screws C.
4. Remove the bolts D.
5. Remove the fasteners E, screw F and fastener G.
6. Pull the front bumper in the direction of the arrow in the order of (1), (2)
and (3), the ...
Parking/Front Side Marker/Front Turn Light Bulb Removal/Installation
1. Disconnect the negative battery cable..
2. Slightly bend back the front mudguard..
3. Rotate the parking/front side marker/front turn light socket in the direction
of the arrow shown in the figure.
4. Remove the parking/front side marker/front turn light bulb.
5. Install in the ...
Intake Air Temperature (Iat) Sensor Inspection [Mzr 2.0, Mzr 2.5]
Resistance Inspection
NOTE:
Because the IAT sensor is integrated in the MAF sensor, replacing the IAT
sensor includes replacement of the MAF/IAT sensor.
1. Remove the battery cover..
2. Disconnect the negative battery cable..
3. Disconnect the MAF/IAT sensor connector.
4. Mea ...