The Subaru Solterra alarm system combines visual and audible alerts to immediately notify of any unauthorized intrusion attempts.
The alarm in the Subaru Solterra will activate under the following conditions when armed:
Setting/deactivating/stopping the alarm system
■ Items to check before locking the vehicle
Before activating the alarm system in your Subaru Solterra, ensure the following precautions are met to avoid accidental activation and to maintain optimal security:
■ Setting
Close all doors, the rear hatch, and the hood, then lock the vehicle. The Subaru Solterra alarm system will automatically arm itself after approximately 30 seconds.
The indicator light transitions from steady illumination to flashing, confirming that the system is fully activated.
■ Deactivating or stopping
To deactivate or stop the alarm system in the Subaru Solterra, perform one of the following actions:
(The alarm will automatically stop within a few seconds after performing these actions.)
■ Setting the alarm
The alarm system can still be activated in the Subaru Solterra even if the hood is open, provided that all doors are securely closed.
■ System maintenance
The alarm system, like other security features of the Subaru Solterra, is designed to operate without the need for routine maintenance.
■ Triggering of the alarm
The alarm may activate in the following scenarios. Stopping the alarm will simultaneously deactivate the system:
■ Alarm-operated door lock
In certain situations, the Subaru Solterra may automatically lock its doors to prevent unauthorized entry when the alarm system is triggered:
NOTICE
■ To ensure the system operates correctly
Do not modify or remove the alarm system components in your Subaru Solterra.
Any unauthorized modification may compromise system reliability and security performance.
Pre-alarm
If the vehicle is unlocked using the mechanical key while the alarm system is being armed, the Subaru Solterra will emit a pre-alarm warning sound for approximately 10 seconds.
If the situation is not corrected within this time, the full alarm will activate, providing both audible and visual alerts.
To cancel or stop the pre-alarm in the Subaru Solterra, perform one of the following:
(The alarm system will deactivate shortly after these actions are completed.)
Additionally, understanding how the Subaru Solterra security system behaves in different scenarios can help owners avoid false alarms and maintain optimal vehicle protection at all times.
Immobilizer systemAfs (Adaptive Front Lighting System) Off Switch Inspection
1. Disconnect the negative battery cable..
2. Remove the AFS OFF switch..
3. Verify that the continuity between the AFS OFF switch terminals is as indicated
in the table.
If the continuity is not as indicated in the table, replace the AFS OFF switch.
4. Apply battery po ...
Flashing the Headlights
To flash the headlights, pull the lever fully
towards you (the headlight switch does not
need to be on).
The headlight high-beam indicator light
in the instrument cluster illuminates
simultaneously. The lever will return to the
normal position when released.
...
Accessory Socket Inspection
Front
1. Disconnect the negative battery cable..
2. Remove the upper panel..
3. Remove the shift lever knob. (MTX).
4. Remove the selector lever knob. (ATX).
5. Remove the shift panel.
6. Remove the accessory socket (front).
7. Connect a tester as shown in the figure and verify that the ...